GT-1 Wiretension meter

Overview of GT-1/70KG Cable tension meter：

The GT-1/70KG Cable tensionmeter is used to measurethe aviation, automobile and tractor, construction and other industrialdepartments in tension (tension). The utility model has the advantages ofsimple structure and convenient operation, and can measure the tension ofvarious specifications (diameter) cables.

Principle of GT-1/70KG Cable tension meter：

The instrumentstructure, mainly in the steel plate as a force element and when the tensioningof cable card block as a fulcrum in the two end, the block as the point betweenthe cable tension push block the plate bending deformation, through a push rodmovable fan-shaped gear drive gear shaft pointer at the end of the degree ofplate rotation indicate the corresponding readings, spring pressure in the gearsector on the edge of the push rod is one-way movement in the casing, when thetension is removed from the cable, so that the pointer in reading, with aswitch rod lift spring can make the pointer back to zero. Tensiometer parts isinstalled in Aluminum Alloy enclosure.

Tech data of GT-1/70KG Cable tension meter：

The measured cablediameter (nominal) range (mm): 2; 3; 4; 5;

Note: the cabletechnology standard is roct2172-43

Tensiometerreadings in the range of 0-100 minimum lattice reading of 2

Maximum range ofmeasurement: 70kg 100kg; 150kg

The indicationvalue of the instrument is + 5%

The total weightof the instrument shall not exceed 0.3KG