Pressure controller of YPK-10 YPK-50 YPK-500 Pressure controller

Introduction for YPK-10

The controller adopts diaphragm sensor, which is resistant to high pressure, long service life, compact structure and small volume. Because the controller adopts special sensor structure, the oil leakage problem of piston controller is solved.

Ambient temperature: - 25 ~ 80 ℃

Enclosure protection grade: IP65

Repeatability error: less than 2%

Medium temperature in contact with the sensor: 0 ~ 80 ℃

Seismic performance: Max 40m / s2

Contact capacity: AC 220V 3A 500W (resistive)

Service life: 1 × one hundred and five

Weight: 0.23kg

The switching difference is not adjustable

Product introduction fpr YPK-50

Ypk-50 pressure controller adopts diaphragm sensor. It can be used in gas and liquid media such as steam without corrosion to stainless steel, cast iron or oil resistant rubber. The set value of the controller is adjustable, and the adjustment range is 0 ~ 20KPa.

technical parameter

Ambient temperature: - 25-55 ℃

Enclosure protection grade: IP40

Installation position: it is allowed to tilt 10 ° in all directions from the vertical state, but vibration shall be avoided.

Contact capacity: AC 380V 3A (resistive)

DC 220V 2.5A (resistive)

Product introduction for YPK-500

The controller is of straight top structure, and the sensor adopts the combination of diaphragm and piston, which can be used for neutral or corrosive gas and liquid media. The set value range is adjustable, and the adjustment range is 0.02 ~ 42MPa. The switching difference is not adjustable

technical parameter

Working viscosity: ＜ 400m2 / S

Enclosure protection grade: IP65

Ambient temperature: - 5 ~ 55 ℃

Medium temperature: 0 ~ 90 ℃

Installation position: pressure interface vertically downward

Repeatability error: ≤ 2%

Contact capacity: ac380v6a (resistive) Pmax ＝ 60