|
Brief Description
The WRE-330 assembly thermocouple is used as a sensor to measure temperature, usuallymatched with display instruments, recording meter and electronic regulator. Itcan directly measure temperature from 0oC to 1800oC ofliquid, vapor, gas medium and solid surface during various productionprocesses.
Since 1987,according to the national regulations, our factory have been producing thermocouplemade from PtRh30-PtRh6, PtRh10, NiCr-NiSi, NiCr-CuNi, Cu-CuNi, Fe-CuNi etc underthe IEC international standard index numbers, and JB/T9238-1 999 standard aswell.
Category Model Graduation Range Allowable error(△t℃)
Platinum rhodium30-Platinum rhodium6 WRR B 0-1800 ±1.5℃ or ±0.0025∣t∣
Platinum rhodium10-platinum WRP S 0-1600 ±1.5℃ or ±0.0025∣t∣
Nickel chromium-nickel silicon WRN K 0-1300 ±2.5℃ or ±0.0075∣t∣
Nickel chromium-copper nickel WRE E 0-800 ±2.5℃ or ±0.0075∣t∣
Model of WRE-330 assembly thermocouple
W Temperature meter
R Thermocouple
□thermocouple material R) Platinum rhodium30-Platinum rhodium6
P) Platinum rhodium10-platinum
N) Nickel chromium-nickel silicon
E) Nickel chromium-copper nickel
□ install and fixed type 1) without fixed device
2)fixed thread type
3)movable flange type
4)fixed flange type
5)movable flange with square tube type
6) fixed thread with tapered tube type
□ junction box type 2)splash proof type
3)waterproof type
4)explosion-proof type
□ design series number 0)ø16mm protecting tube
1)ø25mm protecting tube(duplex tubes)
2)ø16mm high aluminum tube(simplex tube)
3)ø20mm high aluminum tube
Movable flange type thermocouple
Thermocouple Model Graduation Temp range℃ Protection tube material Specs Junction box
Total lengthL mm
Simplex NiCr-NiSi WRN-320 K 0~8000~1000 ICr18Ni9TiICr25Ni20# 300350400450550650900115016502150 Splash-proof type
Duplex Nicr-NiSi WRN2-320
Simplex NiCr-CuNi WRE-320 E 0~600 ICr18Ni9Ti
Duplex NiCr-CuNi WRE2-320
Simplex NiCr-NiSi WRN-330 K 0~8000~1000 ICr18Ni9TiICr25Ni20# Water-proof type
Duplex NiCr-NiSi WRN2-330
Simplex NiCr-CuNi WRE-330 E 0~600 ICr18Ni9Ti
Duplex NiCr-CuNi WRE2-330
Note: 1) Thermal-response time-T0.5<911seconds
2) Protection tube material with “#”means there hasno such type material
Note: For special requirement of the WRE-330 thermocouple, please contact themanufacturer.