UTD-3010 Electric float level transmitter

Overviewof UTD-3010-11 Electric float level transmitter：

The UTD-3010 series is made up of a 3010intelligent liquid level transmitter and a 00 series float liquid level sensor.The 3010 type transmitter is imported from Fisher company, with advancedtechnology and reliable performance. It has HART communication technology andLCD liquid crystal field instructions. The buoy sensor is made by the company,the process is stable, and the technology is mature. The product has an averageMTBF longer than 80 thousand hours. It can measure liquid level, interface orliquid specific gravity. It is widely used in refining, chemical,metallurgical, power generation, pharmaceutical and other industries, and itcan withstand high temperature, high pressure and corrosion resistance. It issuitable for all kinds of flammable and explosive occasions. The output4~20mADC standard signal remote transmission distributed distributed controlDCS system is used to realize the automatic detection and automatic control ofthe process flow.

Maintech of UTD-3010-11 Electric float level transmitter：

Head precision (specific gravity =1): +0.25%FS

Lag: + 0.2%FS

Accuracy: + 0.75%FS

Lag: 0.4%FS

Output: 4~20mA (positive and negativeeffects)

Allowable load: 250 Omega ~520 Omega

Power supply: power supply voltage 24VDC

Allowable voltage fluctuation of + 25%

Process temperature: -40 C ~+350 C

Ambient temperature: -40 C ~+70 C

Ambient humidity: 10~95%

Range: 300~3000mm (specially custom-made)

Medium specific gravity: 0.1~1.5g/cm3

Minimum specific gravity difference ofinterface measurement: 0.1g/cm3

Work pressure: up to 32MPa

Electrical interface: 1/2 inch NPT or M20 x1.5

Intrinsically safe level: Exia II CT6

Flameproof grade: Exd II CT6

Dust explosion type grade: DIP DT T113

Electrical housing: IP66 (NAME 4X)

Intrinsically safe can be used: MTL787S Z787,LB987S, KN9710 Zener safety grid