UQC Magnetic level meter

Overview of UQC-T35 Magnatic level gauge:

The UQC-T35 Magnatic level gauge isdeveloped according to magnetic level meter HG/T21584 - 95 standard. Theutility model can be used for measuring the liquid level in various open orairtight containers, especially for the high pressure, high temperature, highviscosity and strong corrosive medium. Because the tested medium is completelyisolated from the indicator, it has higher reliability, safety andpracticability than the traditional plate and tube type liquid level meter. Atthe same time, when matched with other instruments, the upper and lower alarmof the liquid level and remote automatic control can be realized. Therefore, itis widely used in power, oil, chemical, environmental protection, shipbuilding,building, food and other industries in the production process of liquid levelmeasurement and control.

Principle of UQC-T35 Magnatic level gauge：

The magnetic level meter is developedaccording to the principle of buoyancy and magnetic coupling. When measured inthe container level lift, liquid level gauge leading tube float with lifting,the permanent magnets in float through the relay to the magnetic couplingindicator, drives a red and white turn column flip 180 degrees, when the liquidlevel rises, turn column turned from white to red, when the liquid level drops,by turning column red to white, red and white circles indicator at the actualheight of the medium level in the container, so as to achieve the level ofinstruction.

Main tech data of UQC-T35 Magnatic level gauge:

Measuring range: 300 ~ 15000mm (sidemounted type: 300 ~ 15000mm; top (bottom) mounted: 300 ~ 6000mm)

Accuracy: 10mm

Working pressure: 2.5Mpa (general)

9.6Mpa (high pressure)

0.6Mpa (anti-corrosion type)

Medium density: 0.45g/cm3

Medium density: 0.15 g/cm3 (measurementinterface)

Medium temperature: -20 ~ 250 C (specialrequirements up to 450 ℃)

Medium viscosity: less than 0.4Pa - S, theviscosity of the crystallization medium or low temperature medium, can beselected according to the type of heating jacket type liquid level gauge userrequirements.

Flange: by 1998 the Ministry of chemicalindustry in the latest edition of HG20592 ~ 2063597 flange standard.