Email: sales@shanghai-automation.com

YSG-02 inductive pressure (micro) transmitter
YSG-02 inductive pressure (micro) transmitter
Product name:YSG-02 inductive pressure (micro) transmitter
Manufacturer:Shanghai NO.4 Automation Instrumentation Factory
Classification:Pressure Transmitters > Pressure Transmitters
Sales manufacturer:Shanghai Automation Instrumentation Co., Ltd
Release date:2017-5-5

Overview

YSG inductive pressure (micro) transmitter is mainly forindustrial production processes and measurement systems used to measure avariety of non-crystalline and non-coagulation of steel or iron and its alloyscan not corrode Fluid medium pressure or negative pressure. The instrument cannot only measure the pressure value of the measured medium into a standard DCsignal, in order to facilitate the transmission of measured values over a longdistance, and ultimately in the central control room with the secondaryinstrument to support the production process to achieve automatic detection andcontrol, But also has a mechanical pointer directly to indicate thecharacteristics of pressure values, in order to facilitate on-site inspectionand calibration process.


Main Tech Data

Accuracy:1.6

Voltage   YSG-3 Inductive pressure (micro) transmitter   YSG-2 Inductive pressure (micro) transmitter    

Output   DC 24V   AC 220V  

Load  Resistance   DC 4~20 mA   DC 0~10 mA  

Terminals   ≤250Ω   ≤1KΩ  

Weight   1.0   1.3  

Secondary  instrument   XTMA Pressure digital display instrument   XTMA Pressure digital display instrument    

Ambient: -10 ~ 55 ℃, relative humidity of not morethan 85%.

Temperature effect: Temperature deviationfrom 20 ± 5 ℃, the temperature of the additionalerror not more than 0.75% / 10 ℃.


Model   YSG-2.3  

Measure range   0~0.060~0.10~0.160~0.250~0.40~0.60~10~1.60~2.50~40~60~100~160~250~400~60   -0.1~0   0.1~0.060.1~0.15-0.1~0.3-0.1~0.5-0.1~0.9-0.1~1.5-0.1~2.4 MPa  


Structural principle

The instrument consists of two parts: one is the mechanicalpointer to indicate the pressure gauge; the other is the conversion part andthe electronic amplifier. The former consists of a measuring system driveindicating part and a shell part. The cover of the instrument is a splash-proofstructure with good sealing, so it can protect the internal mechanism frommechanical damage and contamination. The latter includes displacement-inductiveconverters and electronic amplifiers. Amplifier parts with room temperaturevulcanized silicone rubber dip surface, it has a good corrosion resistance andmoisture resistance.


  • Skype

    Skype

    saic.sh@hotmail.com

  • QQ

  • WeChat

    WeChat
  • 回到顶部