UTD-3010G-01  Electric buoy level gauge

Overview

The transmission unit of UTD-3010G-01  Electric buoy level gauge  adopts a dedicated integrated module and outputs a two-wire 4-20mADC standard signal. The power supply is independent of positive and negative, and the maximum current limit is set. It is safer to use. It can be equipped with HART protocol and can be online through a computer or a dedicated programmer. Remote parameter setting,

Working principle

UTD-3010G-01 Electric buoy level gauge , The liquid level in the storage tube changes, and the buoyancy of the standard volume tube changes, which causes the sensor inside the sensor to change. After a special circuit, this change is converted into a standard 4-20mADC signal superimposed on the HART protocol.

Feature

UTD-3010G-01 Electric buoy level gauge

1.Few moving parts, high reliability, and maintenance-free.

2. Two-wire 4-20mADC standard signal output, with HART protocol available.

3. With HART protocol, online adjustment is possible.

4. Strong anti-overload ability,

5. With on-site pointer or LCD display.

6 Intrinsically safe, explosion-proof optional

Main tech data

Measuring range: liquid level: 0-8000mm;

Liquid level: 0-6000mm;

Accuracy: 0.2 level;

Linearity: ±0.2%;

Working pressure: 1.6, 2.5, 4.0, 6.4, 16, 32MPa;

Connecting flange: inner float DN65, DN50;

Outer pontoon side DN40, DN25; top and low DN50;

Connecting flange standard: JB/T81-94 (≤2.5 MPa),

JB/T82.2-94(≥4.0MPa)

Note: Any special design or question of UTD-3010G-01 Electric buoy level gauge,  kindly contact the manufacturer for more details.